How to Build a Dice Tray Setup for Supernova Dice

By Handmade Sharp Edge Tabletop Gaming Dice | Published: 2026-10-16

Category: How-to Guides

Build a Supernova dice tray setup step by step: pick the right tray, place it for comfortable rolling, add accessories, and avoid common mistakes.

Quick answer

Start with a tray whose rolling area matches your dice and table space, then position it within easy reach of your character sheet. The Supernova Dice Tray gives you a 5 x 5 in rolling area and unfolds to 7 x 7 in, so it fits most tables without crowding your notes. Add a tote or pin board for storage and transport, and keep metal or sharp edge dice from landing on bare wood.

Measure your table space before you buy

A dice tray setup only works if the tray leaves room for your sheet, rulebook, and drink. Measure the open area in front of your seat and subtract the space your notes already take. The Supernova Dice Tray unfolds flat at 7 x 7 in with a 5 x 5 in rolling area, which is compact enough for a crowded table but still large enough for a standard seven-piece set. If you use oversized dice or roll many dice at once, check that the rolling area can contain them without bouncing out.

Match the tray material to your dice

Sharp edge resin dice and metal dice hit harder than rounded plastic dice, so the tray surface matters. The Supernova Dice Tray uses two layers of black PU vegan leather with silver magnetic closures, which gives a soft landing and keeps the tray flat when opened. A soft surface reduces wear on sharp edges and quiets the roll. If you often play on a bare wood table, a tray also protects the tabletop from dents and scratches.

Position the tray for a natural roll

Place the tray slightly to your dominant side, about a hand's width from your character sheet. That keeps your rolling motion short so dice stay inside the tray. Keep the tray off the shared battle map area, and leave a gap between the tray and any loose papers so a stray die does not slide under them. If you use a GM screen, put the tray on your side of the screen so players can still see your rolls when needed.

Add storage and transport accessories

A tray is only one part of a tabletop dice tray setup. If you carry dice to game night, a tote keeps the set together and protects the tray from scratches. The Liliuhms x EVDICE Loot Ita Pin Tote is designed to display pins and hold your latest collection, and it ships in 1-3 business days. Use it for dice, tokens, or small accessories so your tray stays clear for rolling. Keep heavy metal dice in a separate pouch inside the tote so they do not chip resin dice during travel.

Test the setup before the session starts

Do a few practice rolls before everyone arrives. Check that dice do not hit the tray walls too hard, that the tray does not slide when you roll, and that you can reach it without standing up. If the tray slides, place a thin rubber mat or cloth underneath. If dice bounce out, move the tray farther from the table edge or switch to a tray with higher walls. A quick test saves interruptions during combat.

Step-by-step dice tray setup

Measure your play space: Clear the area in front of your seat and measure how much room you have for a tray. A 7 x 7 in unfolded tray like the Supernova Dice Tray fits most tables, but check before you commit. Checkpoint: you should still have room for your character sheet and a rulebook.
Choose the right tray surface: Pick a tray with a soft interior if you use sharp edge or metal dice. The Supernova Dice Tray uses two layers of black PU vegan leather, which cushions the roll and protects the table. Mistake to avoid: rolling sharp edge dice directly on bare wood or glass.
Place the tray within easy reach: Set the tray slightly to your dominant side, about a hand's width from your sheet. Keep it off the shared map and away from loose papers. Checkpoint: you can roll without standing up or leaning across the table.
Add a tote or storage for transport: Use a tote like the Liliuhms x EVDICE Loot Ita Pin Tote to carry dice, pins, and small accessories. Keep metal dice in a separate pouch to prevent chips. Mistake to avoid: tossing loose metal dice into the same bag as resin dice.
Test rolls and adjust: Roll a few dice before the session. If the tray slides, put a thin rubber mat underneath. If dice bounce out, move the tray away from the table edge or use a tray with higher walls. Checkpoint: dice stay inside the tray on a normal roll.
Reset between sessions: Empty the tray after play, wipe the leather with a dry cloth, and store it flat or folded with the magnetic closures secured. Keep it away from direct heat. Next step: store your dice set in the tote so it is ready for the next game.

Product facts

Supernova Dice Tray: The Supernova Dice Tray has a 5 x 5 in rolling area and unfolds flat at 7 x 7 in, with two layers of black PU vegan leather and silver magnetic closures. The compact size fits crowded tables, the soft leather protects sharp edge and metal dice, and the magnetic closure keeps the tray flat during play.
Liliuhms x EVDICE - Loot Ita Pin Tote: The Liliuhms x EVDICE Loot Ita Pin Tote is designed to display pins and hold your latest collection, and it ships in 1-3 business days. It gives you a dedicated place for dice, pins, and small accessories so your tray stays clear for rolling and your gear travels safely.
WS Wanderluster - handmade sharp edge 7 piece dice set: The WS Wanderluster handmade sharp edge 7 piece dice set includes one D4, D6, D8, D10, D%, D12, and D20, with a colorful supersaturated design, rose gold foil, and glitter inclusions. A full seven-piece set fits the Supernova tray's rolling area, so you can keep one set ready without mixing dice from different bags.